eHobbyTools.com

N Scale Ruler 1:160

10384

This ruler is 12". It includes scale feet, inches, full-size inch, millimeter, decimal and metric conversion table. The ruler is made of transparent plastic. It's flexible for assembly of three-dimensional kits.

O Scale Template

10386

This template will enable you to save time and costly mistakes in planning. It will aid you in quickly and easily designing even the most complicated track plan. For O, O-27, O42, O-54, O-72

S Scale Template

10387

This template will enable you to save time and costly mistakes in planning. It will aid you in quickly and easily designing even the most complicated track plan.

Split Head Screw Starter Ultra Mini

20199

Made in USA
This American made 5 inch screw starter will solve all your problems of lost screws on the floor. Put the screw on the end, slide the plastic shaft down and that's it. This size will hold the smallest screws 0-80
NEVER DROP A SCREW AGAIN

Specifications:
Length 5 inches
0-80 and other extremely tiny screws
Quick-Wedge # 1253B

12 in 1 Screw Driver

20517

2002 #1 NEW TOOL AT THE CHICAGO HARDWARE SHOW!If there was ever the perfect hobby screw driver here it is. All hardened tips, Phillips – 00, 0 & 1, Torx 5, 6, 7, 8, 10 & 15 and 3 super small slotted. Magnetizer, demagnetizer, stubby screwdriver, pocket clip and built in extension. Closed it is 6” and extends to over 8 ½.

Precision Screw Driver 6 Piece Set All Phillips

20880

This 6 piece set contains 6 phillips screw drivers 0000, 000, 00, 0, 1 and 1.5. Each screw driver has a swivel top that is perfect for those small jobs or working on trains, slot cars, model airplanes, miniatures or doll houses. Comes in a plastic case

Mini Metric Nut Driver 5 Piece Set

21620

This 5 piece set contains metric nut drivers 3.0mm, 3.5mm, 4.0mm, 4.5mm and 5.0mm. Each nut driver is 4 inches long and has a swivel top that is perfect for those small jobs working on trains, race car sets and model airplanes. Perfect for HO, N, Z and G guage and any new train made overseas. Comes in a plastic case.

Mini SAE Nut Driver 5 Piece Set

21619

This 5 piece set contains SAE nut drivers 3/32, 1/8, 5/32, 3/16 and 1/4 inch. Each nut driver is 4 inches long and has a swivel top that is perfect for those small jobs working on trains, race car sets and model airplanes. Perfect for HO, N, Z and G guage and any new train made overseas. Comes in a plastic case.

Mini Metric Open End Wrench 5 Piece Set

21630

This mini 5 piece set contains metric wrenchs 4.0mm, 4.5mm, 5.0mm, 5.5mm and 6.0mm. Great for newer imported models. Comes with a plastic case.

Hobby 21 Piece Set

21643

What a super set, 17 screw drivers, Phillips from #1 to #0000, and slotted from 1mm to 3.8mm. Also has 3 mini pliers 5” flat serrated, 4 ½” diagonal wire cutter and a 5” long nose serrated plier and a hardened case for storage. Comes with a lifetime warranty from the manufacturer.

Metric 21 Piece Set

21645

This is the ulimate set, it contains 5 wrenches 4.0, 4.5, 5.0, 5.5 and 6.0, 2 phillips screw drivers #0 and #1, 3 hex keys 1.5, 2.0 and 2.5, 5 nut drivers 3.0, 3.5, 4.0, 4.5 and 5.0 and 6 slotted screw drivers 0.9 to 3.8mm. This set also includes a sturdy plastic case.

Mini Needle Files 12 Piece Set

30110

This 12 piece set will get you into places that the larger ones can't. These files are 2mm x 100mm. Great for dollhouses, HO, N, and Z train sets as well as any use where the area is restricted. Perfect for working in plastic, metal or wood and comes in a plastic pouch.

Diamond Reamer 4 Piece Set

30294

This diamond reamer set will allow you to open holes or just ream anything needed in the hobby line. A very nice inexpensive set.

90 Degree Cutters

60552

A real neat pair of FLUSH CUTTERS will get you into tight places on an electronic board or cutting out those sprues on your hobby kits.

Flush/Sprue Cutting Pliers

60570

A very inexpensive flush wire/sprue cutter. Will handle up to soft 16 gauge wire. Handle color may vary.

Hard Wire Bender

60577

Super pair of pliers for bending hardened wire. Great for piano or other thin tough to bend items.

Sheet Metal/Plastic Nibbler

60590

This very well made Metal Nibbler will work on 18 guage unhardened metals and plastics. It can make square holes as small as 5/16 inch. Accept no substitute, this is the real thing.

Super Detail Scissors Straight

71003

These 4 inch scissors are stainless steel, surgical quality, super sharp and have super fine ends, perfect for decals. They are spring activated which reduces the effort needed to cut materials. I have seen these offered at $18.00.

Super Detail Scissors Curved

71004

Tenax 7R Welder

76074

Purchase 2 or more bottles at $2.75 each

This space age plastic WELDER is super fast drying that is excellent for models and plastic sheets. Remember you will be welding, not gluing. This means that in order for your TENAX-7R to work the parts must be in place and touching. Then you simply touch the seam with your TOUCH-N-FLOW applicator (76075 or 76076) The TENAX-7R will fuse the seam by capillary action. This will actually weld the parts. Now hold the parts for approximately 10 seconds or until you have a firm bond. The complete weld will take about five minutes to cure but you are able to continue before a full cure is complete.

Touch-N-Flow Applicator

76075

This capillary applicator is especially designed for precise control of liquid solvent plastic cements and C/A activators. It sucks in the cement and you just run the needle across the seam for precise application.

Metric Tap & Die Set

79200

A 30 piece super little kit, comes with the following sizes,1.0, 1.1, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2 & 2.5, with 2 taps for each die. The handle will do both taps and dies.

SAE Tap & Die Set

79205

A 30 piece super little kit, comes with the following sizes, 0-90, 0-80, 1-64, 1-72, 2-56, 3-48, 3-56 & 4-40, with 2 taps for each die. The handle will do both taps and dies

Decal Tweezers

82092

Purchase 2 or more at $2.50 each

These tweezers are stainless steel and 4 ½ inches long. Smooth bent jaws perfect for giving you more control holding and applying decals or stamps.