eHobbyTools.com

Magnetic Pickup Telescoping

20700

Made in USA

This is an AMERICAN MADE, SUPER STRONG, handy tool for getting dropped items out of tight spaces. The head is only a ¼ inch wide but super powerful. It telescopes from 5 1/2 inches to 16 inches and can lift 32 times its own weight.

Picks up over 2 pounds

Magnetic Pickup Telescoping Soft Handle

20702

This is a SUPER STRONG handy tool for getting dropped items out of tight spaces. The handle has a soft black foam and the head is a 3/4 inch wide but super powerful. It telescopes from 6 1/2 inches to 25 inches and can
LIFT OVER 2 1/2 POUNDS

Magnetic Pickup Telescoping with Flexible Head

20703

This is a SUPER STRONG handy tool for getting dropped items out of tight spaces. The head is a 1/2 inch wide but super powerful. It telescopes from 5 1/2 inches to 22 inches and can
LIFT OVER 2 1/2 POUNDS

Magnetic Pickup with Flexible Handle

20705

This is a handy tool for getting dropped items out of tight spaces. The magnet is only ¼ inch wide but super powerful. The handle is 4 inches and the flexible wire is 15 inches. The flexible wire can be bent and re-bent in any shape.

Specifications:
Total Length 20 inches
Handle Length 4 inches
Can lift up to 1.7 lbs(0.77 kgs)

Tool Magnetizer-Demagnetizer

20710

Insert a screwdriver, plier, tweezer, or any tool into the bottom hole and it becomes magnetized, to demagnetize, insert the same tool into the top hole. It really works. Why buy magnetized tools, use your favorite tool and just magnetize when you need it.

Magnetic Bowl

20712

Throw those parts into the bowl, won't leave till you pick them up. Super strong magnetized bowl with a rubber base but still sticks to anything iron or steel.

SAE Allen Set

21636

A nice 8 piece set ranging in sizes from 1/16 to 1/4 inch. Lengths vary from 2 to 3 inches. Handy set to have to open transformers etc. Finish may vary.

Metric Allen Set

21637

A nice 8 piece set ranging in sizes from 1.5mm to 6 mm. Lengths vary from 2 to 3 inches. Handy set to have to open transformers etc Finish may vary.

Complete Hobby Repair & Building Kit

21650

Lifetime Warrenty

This set has 27 pieces, all american sizes (SAE), perfect for model train or airplane repair and building. Five nut drivers 1/8 to 3/16, five open ends 1/8 to 1/4, six screw drivers 1/32 to 9/64, two phillips #1 and #2, three hex 1/16 to 3/32 and four pairs of pliers cutter, needle, flat and end. Also a super molded carring case.

Pin Punch 4 Piece Set

25000

A good item to help remove rivets when fixing or restoring trains. Short of a press, this set will remove some of the smallest rivets. It has a 1/16, 3/32, 1/8 and 5/32.

Pin Punch 8 Piece Set

25005

A good item to help remove rivets when fixing or restoring trains. Short of a press, this set will remove some of the smallest rivets. It has a 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and 5/16.

Center Punch 5 Piece Set

25030

Use to flare rivets. Consists of 1/16, 1/8, 5/32, 3/16 and 1/4 inch ends. Will not give you the rolled feature but it is fine for the runner.

Hobby Hammer

25160

A light weight hammer with 6 interchangeable parts that will make hammering any type of material easy for the hobbyist.

Dual Head Interchangeable Hammer

25155

This hammer has 2 interchangeable heads, Brass and Nylon. This makes hammering differnect types of material easy for the hobbyist. The wooden handle is 8 inches long and has a circumference of 2 inches. Each of the 2 heads are 13mm or 1/2 inch.

5 in 1 Interchangeable Hammer

25150

This hammer has 5 interchangeable heads, Copper, Brass, Nylon, Plastic and Rubber. This makes hammering any type of material easy for the hobbyist. The wooden handle is 9 inches long and has a circumference of 2 1/2 inches. Each of the 5 heads are 18mm or 5/8 inch.

Sheet Metal/Plastic Nibbler

60590

This very well made Metal Nibbler will work on 18 guage unhardened metals and plastics. It can make square holes as small as 5/16 inch. Accept no substitute, this is the real thing.

QuickBlade Cutting Kit

70208

This professional cutting kit, made by QuickBlade comes with an ergonomic handle with a non-slip rubber grip. Included are fabric/wall covering cutter, glass/tile cutter, 5 duratip utility blades, 5 hook blades, a wood saw blade and a metal saw blade all enclosed in a plastic carry case.

Stainless Steel Ruler

10364

This 6” American Made tempered stainless steel ruler has millimeters and inches in 32nd's. On the back are 8^ths, 16^ths, 32^nds and 64ths with decimal equivalents. The sliding top can be used as a depth gage.