eHobbyTools.com

USA Flat Rate Shipping Only $7.00* Per Order ( See "Terms" for Detail )

Electrical Accessories

Platoshear 170 by Plato

60560

Made in USA

Assemblers love its effortless shearing action, comfort, light weight, and safety for electronics lead cutting.
Try a new experience in effortless lead cutting. Platoshear requires 50% less operator effort and has a longer cutting life than conventional cutters because it shears rather than bites. And cushioned handles provide daylong comfort.
Platoshear has a thin profile designed for those hard-to- get-at areas in electronic assembly where conventional cutters can't reach

Features:
Flush cuts component leads as large as 18 AWG copper wire (0.040"/1.0mm)
Unique shear action - requires 50% less operator effort
Ergonomically designed-lightweight (1.8 oz./51grams)
Hidden Return Spring

Flush Cutting Wire Cutters

60550

Made in USA
This is a pair of spring loaded flush cutting wire cutters with vinyl handles. These cutters are used to cut up to 14 gage wire, made of hardened American made steel with a lifetime warranty. Super for cutting wires on circuit boards

Mini Linesman Pliers

60473

These 4 ½” mini linesman pliers meets ANSI standards for quality hand tools. Has serrated teeth, wire cutter, spring loaded and a lifetime warranty.

Heavy Duty Wire Stripper and Terminal Crimper

40005

Uniquely designed for easy wire stripping. Smooth action steel jaws self-adjust to any 10 to 26 gauge wire. Squeeze with quick, even pressure and it strips first time... every time with no damage to wire. It will strip the outer cover off telephone wire without damaging the smaller wires inside, then strip the inside wires one or a few at a time. Crimps insulated, non-insulated and auto terminals.
This will be the best wire stripper you have ever owned!!!

Strips and Cuts 10 - 26 AWG

Crimps Insulated Terminals

Crimps Non-Insulated Terminals 4 - 22

Auto Ignition Terminals 7 - 8 mm

90 Degree Cutters

60552

A real neat pair of FLUSH CUTTERS will get you into tight places on an electronic board or cutting out those sprues on your hobby kits.

Heat Sink Soldering Tweezers

82016

These are 6 ½ inch heat sink, anti wicking self closing tweezers with wooden handles. The end has a hollow opening to hold small parts and wires. Squeeze to open and release to close.

Soldering Tweezers

82060

Purchase 2 or more at $3.50 each

These 6" super handy (paper articulation) stainless steel tweezers sit on the bench like a small vise, are self closing and have teeth to hold items in place.

Electric Alligator Clips Pack of 4

96040

This is a pack of four 2 inch spring loaded alligator clips with a screw. These clips have a lot of applications. They may or may not have covers.

Four Alligator Clips with Insulator Boots - Red and Black

96045

This is a pack of four 1 1/4 inch spring loaded alligator clips with insulator boots (Two Red and Two Black). These clips have a lot of applications.

Four Alligator Clips with Insulator Boots - Black

96043

This is a pack of four 1 1/4 inch spring loaded alligator clips with BLACK insulator boots. These clips have a lot of applications.

Four Alligator Clips with Insulator Boots - Red

96044

This is a pack of four 1 1/4 inch spring loaded alligator clips with RED insulator boots. These clips have a lot of applications.

Heat Shrink Tubing 1/8 inch

96105

Purchase 2 or more at $1.75 each

Gardner Bender polyolefin heat shrink tubing. The tubing shrinks to fit one-half its diameter. For insulating wires, repair cords, cover tool handles, make rope loops & cord ends. Seven pieces per package, made of black polyolefin, UL and CSA listed.

Tubing Information:
For Wire Size 18 to 22 AWG
Diameter 1/8 inch
Length 4 inches
UL and CSA Listed
7 pieces.

Heat Shrink Tubing Mixed Sizes

96106

Purchase 2 or more at $1.75 each

Gardner Bender polyolefin heat shrink tubing. The tubing shrinks to fit one-half its diameter. For insulating wires, repair cords, cover tool handles, make rope loops & cord ends. Eight pieces per package, made of black polyolefin, UL and CSA listed.

Tubing Information:
For Wire Size 10 to 22 AWG
Diameter 1/8 inch Quantity 4
Diameter 3/16 inch Quantity 2
Diameter 1/4 inch Quantity 2
Length 4 inches
UL and CSA Listed
8 pieces.

Self Adjusting Wire Stripper Blue and Yellow

40004

Purchase 2 or more at $6.00 each

This compact self adjusting wire stripper is especially designed for 16 to 24 gauge wire. With little effort it easily handles stranded and solid wire without nicking or damaging the wire. This wire stripper has a built in cutter and adjustable stop for wire stripping length.

Jumper Cables

96050

Purchase 2 or more at $2.50 each

These jumpers have four 2 inch alligator clips, 24 inches long and two color.

Electric Circuit Tester

96055

This is an electric circuit tester for up to 18 volts. The length of the cord is four feet. A very simple tester that will help you find broken circuits. Put the allegator clip on one end and touch the tool to the other, if the light goes on, the circuit is complete, if not there is a break to repair. A super handy item for the train layout. Actual case may vary.

Corded Soldering Iron 30 Watt with Stand

96061

UL Listed
This is a corded 30 watt soldering iron with a plastic handle, plugs into any 110-120 volt outlet. Also included is a stand for the soldering iron.
Specifications:
Total Length 8.50 inches
Handle Length 4.5 inches
30 Watt
UL Listed

Professional Corded Soldering Iron 25 Watt with Stand

96062

Made by ECG
This is a professional quality corded 25 watt soldering iron with a cool grip rubber handle, plugs into any 110-120 volt outlet. Also included is a stand for the soldering iron. Replacement tips are available.
Specifications:
Temperature Reaches 464 Degrees F
Nickel Plated Copper Tip
Total Length 10 inches
Handle Length 5 inches
25 Watt
UL Listed
Limited One Year Warranty

Weller 40 Watt Soldering Iron USA

96064

Made in USA by Weller

A fine quality consumer mini iron, 8-1/4"/210mm long. A lightweight pencil iron, ideal for hobbies with an MT10 1/4"/10mm diameter replaceable nickel-plated copper chisel tip. Develops 900°F/482°C temperature, a stainless steel barrel and heat and impact resistant handle & UL listed.
Suggest retail price $26.95

Specifications:
Temperature Reaches 900 Degrees F
Long Life Nickel Plated Copper Tip
Total Length 10 inches
Handle Length 5 inches
40 Watt
UL Listed

Weller Soldering Gun Kit 8200

96065

This multi-purpose soldering gun kit features duel temperature settings of 100 or 140 watts. It has a built in light, an 8 piece kit including 3 different tips, 3 feet of lead free solder, paste-flux brush, soldering aid tool, instructions and a plastic storage case. UL listed with a 7 year warranty.

Regular price $59.95

Professional Corded Soldering Iron 60 Watt with Stand

96063

Made by ECG
This is a professional quality corded 60 watt soldering iron with a cool grip rubber handle, plugs into any 110-120 volt outlet. Also included is a stand for the soldering iron. Replacement tips are available.
Specifications:
Temperature Reaches 860 Degrees F
Long Life Nickel Plated Copper Tip
Total Length 10 inches
Handle Length 5 inches
60 Watt
UL Listed
Limited One Year Warranty

Weller 25 Watt Soldering Iron Kit USA

96067

Made in USA by Weller

This fine US made quality mini-iron is feather-light with a pencil handle that makes it exceptionally easy to maneuver when you're working with hobby kits, radios or electronics. It develops to a temperature of 750 degrees F / 400 degrees C, and it's made with a stainless steel barrel -- and a heat and impact-resistant handle. This kit includes three 1/8-inch nickel-plated tips: MT1 pencil point, MT2 flat screwdriver, MT3 chisel and a soldering aid tool. This product is UL listed for safety

Specifications:
Temperature Reaches 750 Degrees F (400 Degrees C)
Three 1/8 inch Nickel Plated Tip
Total Length 10 inches
Handle Length 5 inches
25 Watt
UL Listed

Portable Rechargeable Soldering Iron

96066

Made in USA

Tired of dragging out the soldering iron? I have used this one for over 20 years. It is lightweight with a balanced design for up to 125 joints per charge. Heats up in 5 seconds and lights up your work. Comes with a recharging stand and easily replaceable rechargeable nicad batteries and 2 tips.

One full year warranty

Weller Replacement Soldering Gun Tip 8200

96109

Genuine Weller replacement tip for models 8200 and 8200PK soldering guns.